Description
200M HDMI IP Extender is based on TCP/IP standard. It transmits your HD display with the high resolution up to 150 meters away from your DVD or computer source by
using one CAT5e/6 cable.
At the same time, it’s convenient to transmit HDMI audio and video source by point-to-point mode, multipoint-to-multipoint mode and cascade connection mode .
Features:
* H.264 code transmission, transmission rate 8.1Mbpsï¼›
* Support point-to-point mode, multipoint-to-multipoint mode and cascade connection modeï¼›
* 802.3 Ethernet standardï¼›
* Support IR remote controlï¼›
* The transmitter support HDMI loop-out functionï¼›
* Support software management during multiple-to-multiple transfers.
Specification:
HDTV Resolutions…………………………………………………………………….. 480p,720p,1080p
Audio………………………………………………… Sample rate:32kHz,44.1kHz and 48kHz code
IR remote control……………………………………………………………………………… 38 KHz;NEC
Power adapter…………………………………………………………………………………… DC:5V/1.5A
Specifications
Physical interface diagram
Port Description
DC/5V 5V power supply for the Transmitter
Reset Press the key,the device will re-start
IR-TX Connect IR transmitter
HDMI IN HDMI input ,connect HDMI signal source
HDMI OUT HDMI output, connect HDMI display device
Ethernet Network interface by cat5e/6
HDMI Transmitter
Port Description
DC/5V 5V power supply for the receiver
Reset Press the key,the device will re-start
IR-RX Connect IR receiver
HDMI OUT HDMI output, connect HDMI signal device
Ethernet Network interface by cat5e/6
HDMI Receiver:
The Max Power consumption…………………………..HDMI sender:3W HDMI receiver:3W
Size(L-W-H)………………………………………………………………………………………93*79*27mm
Weight……………………………………………………………………………………………………228g x 2
Operating Temperature/Humidity…………………..0℃-45℃/10%-80%RH(no condensation)
Storage Temperature/Humidity…………………….-10℃-70℃/5%-90%RH(no condensation)
Interface diagram:
Application diagram:
1.
2.
3.
　
Connection and operation:
1) Connect the HDMI source (such as DVD, PS3, STB ) to the “HDMI IN” of transmitter by HDMI cable.
2) Connect the “HDMI out” of Receiver to HDTV display by HDMI cable.
3 )Connect the Transmitter and Receiver with one cat5e/6 cable (recommend).the furthest distance is 200M.
4) Connect the “IR receiver “into “IR-RX” port on receiver, and “IR transmitter ” into the “IR-TX” on transmitter, and make sure the IR transmitter aim at IR port of the source
5) Connect two pieces of 5V power supply to the transmitter and receiver, and power on the HDTV display and HDMI source.
6) Multi-to-multipoint matching setting：As multiple TX and multiple RX units are connected to switches, you can use management software for pairing management.
Applications:
200M HDMI extender over IP is used in audio-visual conference, command and controlcenter, ticketing platform, home theater, multi-media teaching, conference system and so on.
Packing contents:
1. Transmitter x 1 PCS
2. 5V Power adapter x 1 PCS
3. IR cable TX x 1 PCS
